Versions Compared

Version Old Version 12 New Version 13
Changes made by

Philip Jones

Philip Jones

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Navigate to https://tap.tacc.utexas.edu/mfalogin/

  2. Login with your TACC username, password, and the token from your MFA app

  3. Don’t be intimidated by the long form. After filling it out once, you can resubmit the same settings.

    1. For standard compute use these settings:

      1. System: Stampede3

      2. Application: Jupyter Notebook

      3. Project: <select the project code shared by your instructor in the drop down>

      4. Queue: skx-dev

      5. Job Name: Jupyter Standard

      6. Time Limit: 1:0:0

      7. Reservation: <Leave Blank>

    2. For GPU compute, use these settings:

      1. System: Lonestar6

      2. Application: Jupyter Notebook

      3. Project: <select the project code shared by your instructor in the drop down>

      4. Queue: gpu-a100-small

      5. Job Name: Jupyter GPU

      6. Time Limit: 1:0:0

      7. Reservation: <Leave Blank>

  4. Hit Submit and wait for the next screen. It can sometimes take up to 60 seconds

  5. On the Job Status screen, click “Connect”

    1. If you don’t see Connect, wait 30 seconds and click “Check Status” till you see Connect

FAQ

Cfm expand
headerSizesmall
an.spaceKeyiSchool
backgroundColor#FFFFFF
previewThemedark
styleaccent
textColorPaletteDefault
chevronColorvar(--ds-text-discovery)
idrpctqtqxzcd
titleQ: Why do I see “Job 1234567 has ended” when I try to connect to Jupyter on Stampede3?
textColorvar(--ds-text-discovery)
backgroundColorPaletteDefault
content[{"type":"paragraph","content":[{"type":"text","text":"A: You need to perform step 2 above, Prep the Portal: "},{"type":"text","text":"https://cloud.wikis.utexas.edu/wiki/spaces/iSchool/pages/273943788/TACC+Analysis+Portal+Pilot+-+Student+Guide#%3A2_two_square_green%3A--Prep-the-Portal","marks":[{"type":"link","attrs":{"href":"https://cloud.wikis.utexas.edu/wiki/spaces/iSchool/pages/273943788/TACC+Analysis+Portal+Pilot+-+Student+Guide#%3A2_two_square_green%3A--Prep-the-Portal"}}]}]},{"type":"paragraph","content":[]}]
Cfm expand
headerSizesmall
an.spaceKeyiSchool
backgroundColor#FFFFFF
styleaccent
textColorPaletteDefault
chevronColorvar(--ds-text-discovery)
idv9l4d82st2c
titleQ: Why do I see "No Allocation Available" when I login?
textColorvar(--ds-text-discovery)
backgroundColorPaletteDefault
content[{"type":"paragraph","content":[{"type":"text","text":"A:","marks":[{"type":"strong"}]},{"type":"text","text":" If the TACC Analysis Portal cannot find an allocation for your account on a supported system, you will see the message below. Make sure you already setup your TACC account and shared your TACC username with your professor."}]},{"type":"mediaSingle","attrs":{"layout":"center","width":100},"content":[{"type":"media","attrs":{"type":"external","height":1216,"width":1999,"url":"https://cloud.wikis.utexas.edu/wiki/download/attachments/273943788/564g99fepca.png"}}]},{"type":"paragraph","content":[]}]
Cfm expand
headerSizesmall
an.spaceKeyiSchool
backgroundColor#FFFFFF
styleaccent
textColorPaletteDefault
chevronColorvar(--ds-text-discovery)
idbpfvte74vph
titleQ: Why do I see PENDING after I submit my job?
textColorvar(--ds-text-discovery)
backgroundColorPaletteDefault
content[{"type":"paragraph","content":[{"type":"text","text":"A: ","marks":[{"type":"strong"}]},{"type":"text","text":"If the job does not start immediately, TAP will load a status page with some diagnostic information. If the job status is \"PENDING\", the job was successfully submitted and has not yet started running. Clicking the \"Check Status\" button will update the job status. When the job has started, TAP will show a \"Connect\" button."}]},{"type":"mediaSingle","attrs":{"layout":"center","width":100},"content":[{"type":"media","attrs":{"type":"external","height":1160,"width":1999,"url":"https://cloud.wikis.utexas.edu/wiki/download/attachments/273943788/44tqlbvjo7p.png"}}]},{"type":"paragraph","content":[]}]
Cfm expand
headerSizesmall
an.spaceKeyiSchool
backgroundColor#FFFFFF
styleaccent
textColorPaletteDefault
chevronColorvar(--ds-text-discovery)
id59rh6nosjon
titleQ: Can I check if nodes are available before submitting my job?
textColorvar(--ds-text-discovery)
backgroundColorPaletteDefault
content[{"type":"paragraph","content":[{"type":"text","text":"A:","marks":[{"type":"strong"}]},{"type":"text","text":" Yes, under System Status click Details for the system you want to connect to. The Idle Nodes count next to the relevant queue (skx-dev on Stampede3 or gpu-a100-small on Lonestar6) tells you how many nodes are currently available for connections."}]},{"type":"mediaSingle","attrs":{"layout":"center","width":100},"content":[{"type":"media","attrs":{"type":"external","height":1486,"width":2330,"url":"https://cloud.wikis.utexas.edu/wiki/download/attachments/273943788/nn0rwqslbi.png"}}]},{"type":"mediaSingle","attrs":{"layout":"center","width":100},"content":[{"type":"media","attrs":{"type":"external","height":1486,"width":2330,"url":"https://cloud.wikis.utexas.edu/wiki/download/attachments/273943788/tf85ycfmp3r.png"}}]},{"type":"paragraph","content":[]}]