...
4. Click “Skip All” at this menu if it comes up.
5. When the template opens save your project by selecting >File >Save Project As. Title it and save it to the Storage drive or to your external hard drive. Don??t save the file to the desktop. ProTools will not function properly if working with a file off the desktop.
...
7. Figure of the Mix tool to show how to bus channels 1,2 and 3 to 1 & 2 then have the master channel record inputs from Bus 1 and 2.
8. Screen Grab of Track Configuration. The following steps (5-show how to set this up but template is already set up so no further configuration should be needed
except for troubleshooting purposes.
9. Channel 1 or (Live Mic) input must set the input to Mic/Line 1 this should be a mono channel
...
11. Channel 2 or (CD 1) input must be set to Analog 5-6 which is the input from CD player 1 Should be a stereo channel
12. The output should be set to Bus 1-2 (Stereo) This will be feeding Channel 4 the Master record track input
13. Channel 3 or (CD 2) input must be set to Analog 7-8 which is the input from CD player 1 Should be a stereo channel
14. The output should be set to Bus 1-2 (Stereo) This will be feeding Channel 4 the Master record track input
15. Channel 4 which is the (Master Record) will record the input from Bus 1-2
16. This will be a stereo channel.
17. Channel 4 (Master Record) will record the input from the Bus 1 and 2 but will need to output to Analog 1-2 (Stereo)
18. Once set up is configured then put an Audio CD in each player (1 & 2)
...
24. To record the soundcheck: Open the Transport Window (Go to >Window>Show Transport) Click the Red Record button and then click the play button to commence recording as normal. Use the faders on channels 1-3 to control the channel input levels and fade in and out as needed. Click the Stop button on the transport window to stop recording.
