Page Comparison

Connect the Battery and or Power Supply here

Battery Connected show here

PL mount lens and locking mechanism

Mount the lens as shown

This is the shoulder mount plate on the bottom of the camera


Slide the shoulder mount on to the plate and make sure it locks in place

Connect the Pistol Grip or Lens grip
power and control cable
shown here

Connect the mounting bracket for the grip shown here

mounting bracket for the grip shown here


Tighten the bracket with the wing nut type thumb screw

Here is an example of how the pistol grip looks all setup

Press the Door Hinge to open the Card Slot door

Insert a P2 and an SD card

P2 for the Hi Res recording and SD for Proxy recording
MUST USE BOTH CARDS or the camera wont record

Turn on the power button to the camera

Format the Cards before you record


Press Menu

Choose System Settings by Pressing the knob at the right of the screen

Scroll down to Cards/Media

Choose Format Media

Format the Card in the Main Slot = P2 and the Sub Slot = SDHC slot

Re-Set the camera to Factory Settings because that is the most used settings. It will set the camera to 4K 23.98 recording to the P2 and HD 1080 proxy files recording to the SD card

Choose System Settings by Pressing the knob at the right of the screen

Choose Initialize

Load Factory Data

Choose YES to Restart the System and restore Factory Defaults

To Auto White Balance on a white board use the AWB Hold button

Press the VIEW button to put the monitor in Viewing mode

Press the REC button to start recording

This button toggles recording on and off

To adjust the Overcrank and Undercrank press the VFR white button on the "Home" page of the camera "Control Panel"

Press the same white button again to turn "ON" VFR and then turn the knob to what frame rate

4K only will go to 30FPS overcranking
and 2 fps undercrank
2K will go to 60 FPS over crankImage Removedovercrank

Image Added

Once you have shot footage on the Alexa you need to bring that into AVID. Launch AVID

Image Added

The Initial Project Screen will open. Here is where you choose where you create and save new projects. Click on the "Folder" to select where to save your new projects also how to navigate to already existing projects.

Image Added

Navigate to the hard drive and folder that you want AVID to access and save new projects

Image Added

You can look at the path where AVID will be accessing projects once you select the folder

Image Added

Now click on the "New Project" button

Image Added

The New Project Dialog will come up. Select the project parameters

• Choose the Project Name
• The Format
• Usually will be 2K 2048 x 1152 23.98
  
  DON'T WORRY WE CAN CHAGE THIS LATER IF YOU SHOT AT A DIFFERENT FORMAT BUT NOT SURE
• Color Space YCbCr
• Stereoscopic Off Click OK to create the project
  Click OK to create the project

Image Added

Open the Source Browser if you haven't already

Go to >Tools>Source Browser

Image Added

Choose to "Link"

Navigate to the location of the RAW Card Files

You should be able to select the folder that contains all the card files


Click on Link

Image Added

The files will load into the open bin

Image Added

Select the files in the bin and choose >clip>Consolidate/Transcode

Image Added

Then select where you want to save the consolidated files and choose the "Target Video Resolution"

We recommend
DNxHR LB MXF
 
 
 
 
Then Choose Transcode

Image Added

Edit with the master clip not the linked file

Notice the different icon for a linked file

Image Added