...
Click on the Bus tab and make sure that the Bus Output matches the same Output in the "Output" tab in the previous screen grab
On every track |
|
...
Use this knob for volume on the HD OMNI it is under the desk in CMB 1.113 or on the desks in the rest of the rooms. Press it a couple of times to show CR for control room vomue.
MAKE SURE THE MUTE BUTTON IS NOT PRESSED |
|
If you have video you would like to use in your protools session turn on the TV MAKE SURE THAT THE SOURCE IS SET TO COMPONENT - |
|
PRESS THE SOURCE BUTTON UNDERNEATH THE "9" KEY TO SET INPUTS ON THE MONITOR |
|
Next Import the video into the project |
|
Navigate to the video file that you want to view in the ProTools session |
|
Choose to import at Session Start |
|
Choose to enable the Video Engine |
|
If you would like to use the audio off the video file choose to save it to the default Audio Drive folder |
|
Some of the Suites on the 1st floor have a Mixer. The mixer settings are shown here. Channel 1 and 2 are AVID playback are ProTools playback Also turn up the Master audio on the Board labeled Volume You don't have to set anything to see video out it will send it out automatically if you have the Black Magic Design Intensity Pro Connected properly |
|
