...
To use the ATEM software, plug in an ethernet cable to the port on the back of the unit labeled - ATEM You MUST set the IP address on the computer to static and use the IP address of 192.168.10.5 |
|
Now you can configure and run a show with the software (if desired) with the software. You can start and stop Media Playback, switch out graphics for the downstream keys, switch cameras, etc. |
|
...
In order to stream live, plug in an ethernet cable into the port labeled WEB PRESENTER. This needs to be a port that has open access to the internet. NOTE: If you plug in a USB-C cable to the front port on the Web Presenter you can use the webcam feature of the Web Presenter. This would present the PROGRAM OUT to the computer as a webcam. You can then stream to your platform of choice, ie. FaceBook Live, YouTube, etc. To do this you would have to log in to the account (Facebook, YouTube, etc) that you want to use. Then that platform will see the Web Presenter as a webcam. |
|
Hook up a USB cable from your laptop to the front USB port on the Web Presenter. This is USB-C on the Web Presenter. |
|
Download Web Presenter Software This will allow you to configure the Web Presenter. Click the round icon show here to change settings. |
|
Under Live Stream: You can set where the stream will go. Platform = (Usually) YouTube Server = Primary Key = copy the stream key from the platform site and paste it where it says "Key". Once the stream key has been set and you are ready to stream you can click the ON AIR button. Or you can press the physical ON AIR button on the front of the Web Presenter. To STOP a stream, press the OFF button. |
|
Using the Web Presenter as a Webcam: Plug in a USB-C cable from the front USB port to a computer and any streaming platform will recognize the PROGRAM OUT as a webcam. Just log into the streaming platform of choice (FaceBook Live, YouTube, Twitchy, etc) and use the Web Presenter as a webcam. |
|
Media Playback with Hyperdeck
...