Page Comparison

...

Go to the video patch panel.

Patch the deck you want to use into the Teranex

In our example we are capturing from VHS002 so we have the VHS deck patched into the Teranex Composite Y In

Audio Input

Set the Master slider to about 0

Find the 3/4, VHS or Hi8 on the Audio mixer

Raise the level up on the slider to abou 1/4 to 1/2 way up (-10 to 0 range)

The "evertz" is a sync generator that needs to be turned on
Turn on the power switch for the "evertz" unit
Turn on the power for the DigiBeta Video Tape Machine		Image Removed	Image Removed
If you wanted to capture from Hi-8 or 3/4 inch just move the patch from the VHS to the Hi-8 or 3/4 Out.	On the Patch Panel on the rack patch DIGIBETA - HD-SDI OUT to	Image Added
TERRANEX - SDI IN	Image Added
Put the tape in the deck
Turn on the Teranex - It'll take a bit to turn on,
Go to >Apple>System Prefs >
Choose the ALL settings icon to see all the settings
Choose Blackmagic Design Desktop Video
Click on Teranex settings icon shown here
Video Input - Change Input to SDI Click SAVE
Audio Input - Embedded Click SAVE
Open Blackmagic Media Express
Go to >Media Express> Preferences
Set the Video Format to HD 1080p 23.98 Capture File Format will be ProRes 422 Set the destination for the captured files to your HD
Put the tape in the deck and hit Play
Click on the Log and Capture Tab in Media Express Wait about 5 or so seconds
You should see image and audio levels Then click on the "Capture" Button to start capturing. Capture Button will turn RED
Capture Button will turn RED
Click Capture to stop capturing
Turn off the Teranex when finished
TURN OFF THE DigiBeta Deck WHEN FINISHED
	Image Added
	Image Added

Versions Compared