Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Lavs come with two very similar looking pieces, a transmitter and a receiver.

Transmitter is the end with the microphone connected to it

Image Added

Receiver is the end that will plug into the Audio Mixer

Image Added

Here is the Receiver plugged into an audio mixer. It will also have the RF on the front of the receiver.

Image Added

The Transmitter is connected to the microphone placed. Start with the mic about 8 inches below your talent's chin and adjust it from there until it sounds natural in your headphones.

Image Added

Make sure both units have 2 AA batteries each.

Turn on each one by flipping down the case that holds the batteries and turn on the ON/OFF button till the ON light turns red for ON

Image Added

ON light turns red for ON

Image Added

Out of the box, the transmitter and receiver should have matching frequencies, meaning they can talk to each other wirelessly

Make sure the frequency's match

Image Added

To Change the frequency

On the transmitter or receiver, press SET to activate the menu.

Image Added

Press up/down buttons to select "Frequency Preset"

Image Added

Use the Up and Down arrow buttons to change the frequency

Image Added

To Set frequency hit SET




Stored will show up when the frequency is saved.

Anchor
_GoBack
_GoBack
Image Added

then hit the on/off button to get out of the menus.

Image Added