...
- To activate this feature, from the dial tone, dial *84 28886 and wait for the confirmation tone, then hang up.To deactivate this feature
- IMPORTANT: The default number of rings callers hear before forwarding to voice mail is 9. To change the number of rings, from the dial tone, dial *85 and 33 followed by any number of rings from 2-9, wait for the confirmation tone, then hang up.
...
- For example, to set your phone to forward after 4 rings, dial 334. Note: This is the number of rings
...
- From the dial tone, dial 33 followed by one of these codes: 2 = 4 rings, 3 = 6 rings, 5 = 9 rings, 6 = 11 rings, 7 = 13 rings, 8 = 14 rings
- Wait the caller will hear; the number you hear on your set may very depending on the type of set you have. The ring cycle for callers is approximately 6 seconds.
- To deactivate this feature, from the dial tone, dial *85 and wait for the confirmation tone, then hang up. Note that if you reactivate this feature later, it will default back to 9 rings and you may wish to adjust the number of rings.
To forward calls to voice mail when you're already on the phone:
...