Versions Compared

Version Old Version 1 New Version Current
Changes made by

Manal Darpan Shah

Sam Burns

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Version published after converting to the new editor

Setting up a hybrid meeting in UTA 5.522 isn't an easy task. Here is how to make it happen.

Prerequisite: Come to the room at least 30 minutes prior to the meeting. Setup is

...

complex and requires attention to details.

...

Quick Checklist

     

 

PRESENTER

MEETING HOST

AUDIENCE IN THE ROOM

  •  Bring your own laptop. Do not use room computer.
  •  Connect to projector via HDMI cable or USB-C adapter.
  •  Enter meeting room setup by Meeting Host.
  •  Mute speakers and set microphone volume to zero.
  •  Open Powerpoint and share the screen. Then start the presentation (Presenter view with notes will work)
  •  Bring your own laptop.
  •  Connect to the Owl equipped in the room via USB-A cable or USB-C adapter.
  •  Setup meeting room. Make sure presenter and remote attendants have link.
  •  Set the Owl as speaker & microphone.
  •  Do not forget to Record meeting if desired
  •  Mute speakers and set microphone volume to zero if you intend to connect to the online meeting room while present in the physical meeting.


Schema Diagram

Image RemovedImage Added

Details

Presenter

  • Set-up should look like this. Plug in HDMI cable (may use white USC-C adapter). On the Crestron terminal (small touch screen on the table), select "HDMI".

            Image Removed Image Added

  • Connect to EDUROAM or UT GUEST wifi. If you are connected to UT GUEST wifi and using Teams as a meeting application, it is safe to enter the meeting from browser 
  • Enter online meeting room . (Mute your microphone and speakers.)Set as mute, and also make sure to turn the microphone volume to zero. You can do so on your own computer, or in the meeting application.


    (Computer)Sound → set to 0                                          (ZOOM) Audio Setting → Set Speaker and Microphone → set to 0                                               (Teams) You can mute and turn off microphone on entrance to meeting, or... 

   Image Removed.          

        (Teams) You can also open More → Setting, and edit audio setting. 

...

  • Create meeting room and set the Owl as the speaker and microphone.Scenario 1: When Owl is not connected:

          (Zoom)                                                                                                                    (Teams)                                    Image RemovedImage Removed

  • Scenario 1: When Owl is connected:

          (ZoomTeams)

Image RemovedImage Removed

  • To enable Owl 360 degree view:

Image RemovedImage RemovedImage Removed         Image AddedImage Added

Audience in the room

  • Mute speakers and set microphone volume to zero if you intend to connect to the online meeting room while present in the physical meeting. This is needed in order to avoid audio feedback that will happen when there are multiple speakers and microphones in a room. 
  • Audience not in the room can participate as usual (Speaker on, mute and unmute yourself when necessary).