...
TWO THUNDERBOLT CABLES HAVE TO BE PLUGGED IN!!!! TO THE IMAC Check that the WHITE Thunderbolt cable is plugged into the IMac | |
| Make sure the other end of the WHITE - Thunderbolt cable is plugged into the Blackmagic Design Intensity Pro as shown here. |
|
| NEXT Check that the BLACK Thunderbolt otherThunderbolt cable is plugged into the IMac |  |
The other end of the black Thunderbolt cable needs to be plugged into the AVID Native Thunderbolt box Shown Here | 
|
| Make sure the AVID OMNI is turned on |  |
Open ProTools>Create Session or open existing session |
|
| Go to Setup>Playback Engine |  |
| Choose HD Native Thunderbolt |  |
| Go to Setup>Hardware |  |
...
Next Import the video into the project |
|
Navigate to the video file that you want to view in the ProTools session |
|
Choose to import at Session Start |
|
Choose to enable the Video Engine |
|
If you would like to use the audio off the video file choose to save it to the default Audio Drive folder |
|
Some suites have the Mackie Big Knob ProTools and AVID Inputs are labeled and use Monitor Select B make sure Mute is not pressed |
|
Some of the Suites on the 1st floor have a Mixer. The mixer settings are shown here. Channel 1 and 2 are AVID playback are ProTools playback Also turn up the Master audio on the Board labeled Volume You don't have to set anything to see video out it will send it out automatically if you have the Black Magic Design Intensity Pro Connected properly |
|
...