...
This guide is intended to be used to start a jobĀ that was inadvertently terminated. A Job may stop or fault for a variety of reasons. The '-- Unexpected Output Fault ! --' error is caused by a miss-step in communications from the workstation to the Shoptbot controls. |
...
This guide may also be used to start a job part-way through for any reason.
Solution
...
SolutionIf you receive a '-- Unexpected Output Fault ! --' error, make sure to note down the line number in the 'Current Line' box |
...
- Image Removed
...
...
...
- This command allows you to choose which line in the file to start your job at. we will want to resume our job on the same line number.
...
- to resume a job at a specified line in the code
Image Added- Click 'Setup a Re-start of this file'
|
...
- Enter your desired starting point in the 'Line Number' box
- Click 'GO'
|
...
- and allow the ShopBot to move to the desired start position
|
...
...
...
Image Added- The ShopBot will notify you to turn on the spindle by pressing the green 'start' button
|
...
- (right side of ShopBot pendent)
- Verify VISUALLY that the bit is now rotating in the spindle
|
...
...
- while keeping your hand near the red EMERGENCY STOP button while the operation starts
|