Lavs come with two very similar looking pieces, a transmitter and a receiver. | |||||||
Receiver is the end that will plug into the Audio Mixer | |||||||
Here is the Receiver plugged into an audio mixer. It will also have the RF on the front of the receiver. | |||||||
The Transmitter is connected to the microphone placed. Start with the mic about 8 inches below your talent's chin and adjust it from there until it sounds natural in your headphones. | |||||||
Make sure both units have 2 AA batteries each. | |||||||
ON light turns red for ON | |||||||
Out of the box, the transmitter and receiver should have matching frequencies, meaning they can talk to each other wirelessly | |||||||
To Change the frequency | |||||||
Press up/down buttons to select "Frequency Preset" | |||||||
Use the Up and Down arrow buttons to change the frequency | |||||||
To Set frequency hit SET |
| ||||||
then hit the on/off button to get out of the menus. |
Content Comparison
General
Content
Integrations