Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


Make sure the Samsung SSD is present and plugged into the Blackmagic ATEM switcher.

On the Streamdeck controller, the top right corner button starts and stops recording on the ATEM and shows you the total runtime.

To begin recording, press the button once and it will turn red and begin to count up. 

Image Added

You can monitor the record status from the Multi-viewer monitor that is mounted above the Windows PC monitor. 


The information displayed about the recording consist of the record status, timecode for current recording,  total hours recordable to the SSD, and space (in GB) remaining on the SSD. 

To STOP the recording, press the record button again and it will change from red to black.

Image Added

Start a recording from the ATEM Software Controller