Power cycling the TV switcher rack takes several minutes. If you have to move /or power cycle the rolling TV switcher from BMC2.106BA, reset the following:
AJA Ki Pro
- In the Ki-Pro, click Config > Menu 2.1 Video Input = HDMI
- In the Ki-Pro, click Config > Menu 2.2 Audio Input = HDMI
- In the Ki-Pro, click Media > Menu 14.1 Record Type = set recording quality desired
...
| FS2 Connection | Function | Cable # |
|---|---|---|
| SDI In 1A | SXR PGM Out | DV8043 |
| SDI In 2B | none | none |
| HDMI In | Convert Jackpanel Aux HDMI In to SDI Switcher Input 12 | DV8202 |
| SDI Out 1A | Converted Jackpanel Aux HDMI In to SDI Switcher Input 12 | DV8012 |
| SDI Out 2B | Embedded HDSDI PGM Downconverted to composite video on Jackpanel | DV8221 |
| HDMI | Embedded HDMI PGM to HDMI 1x4 DA to recording Devices | DV8223 |
FS2 Menu settings should be:
- SDI1 Out = Processor1
- SDI2 Out = Processor2
- HDMI Output = Processor2
- Input 1 = HDMI
- Input 2 = SDI1
- HDMI Audio Out = Ch1-8
- AES-EBU = Processor1
- Analog Audio Out = Ch1-8
- Audio1 (button) embedded audio out = off
- Audio1 (button) audio input = analog
- Audio2 (button) embedded audio out = on
- Audio2 (button) audio input = analog
...