Page Comparison

...

1. Open the Remote Desktop Connection application
2. Click the Show Options button in the lower left corner of the application window

Image RemovedImage Added

1. Click the Advanced tab
   Image RemovedImage Added
   
   
2. Click the Settings... button in the Connect from anywhere section
   Image RemovedImage Added
   
   
3. On the RD Gateway Server Settings window, ensure the following are set:
   
   • The Use these RD Gateway server settings option is selected
   • The Server Name is set to rdg.austin.utexas.edu
   • The Logon method is set to Ask for password
   • The Bypass RD Gateway server for local addresses checkbox is cleared
   • The Use my RD Gateway credentials for the remote computer is set as follows:
     
     • For users that will connect to the remote computer with their EID, the checkbox should be checked
     • For users that will connect to the remote computer with an account other than their EID, the checkbox should be cleared
     Image RemovedImage Added
     
     
     
4. Click OK to close the RD Gateway Server Settings window
   Image RemovedImage Added
   
   
5. Browse to the General tab
   Image RemovedImage Added
   
   
6. Click the Save button in the Connection settings section
   Image RemovedImage Added
7. Click Hide Options button
   Image Removed
   Image Added

Connecting to Remote Desktop resources through the Remote Desktop Gateway

...

1. Open the Remote Desktop Connections application
2. Ensure that Configuring the Remote Desktop Gateway in the Remote Desktop Connection application section above has been completed before continuing.
3. Fill in the Computer text box with the name of the computer that you intend to access
   Image RemovedImage Added
   
   
4. Click Connect
   Image RemovedImage Added
   
   
5. In the Windows Security window, provide your EID prefixed with AUSTIN\ and your EID password then click OK
   
   1. If the Use my RD Gateway credentials for the remote computer option was selected in the Configuring section above, the window will show the provided credentials will be used for both the RD Gateway and the remote computer
      Image RemovedImage Added
      
      
   2. If the Use my RD Gateway credentials for the remote computer option was not selected in the Configuring section above, the window will show the provided credentials will be used for the RD Gateway
      Image RemovedImage Added
      
      
   3. The Remote Desktop Connection application will start the connection process.
      Image RemovedImage Added
      
      
6. Approve the Duo authentication request.
   
   • The Duo authentication request will be sent to the default authentication method configured for your EID
   • Push notification and phone calls are supported by the Duo for RD Gateway software
   • Passcodes are not supported for two-factor authentication by the Duo for RD Gateway
7. If the Use my RD Gateway credentials for the remote computer option was not selected in the Configuring section above, you will be prompted for the credentials for the remote computer:
   Image RemovedImage Added
8. Remote Desktop Connection will show the following window while completing the connection to the remote computer
   Image RemovedImage Added

Ending Your Connection

...

1. Inside the Remote Desktop session, right click on the Start icon in the lower left hand corner of the Remote Desktop resource
2. Select Shut down or sign out then select Sign out(or other option as needed) to end your session
   Image RemovedImage Added