Do not do this unless you have locked up the switcher.
Do these steps:
Ross reset
Menu>Reset>Next>Factory Reset>Push the button>Confirm>
If that does not work do this next
Go into the production control room behind the CMB Proctor desk Find the Ross Crossover Switcher Press in towards the middle of the rack the two black tabs to open the fron |
|
Turn off the power button here. Wait about 3 minutes and turn on Then it'll take about 5 or more minutes to boot up |
|
Then you will have to do the Studio 4A – Ross Switcher – Audio N – Pass Setup | Ross Crossover Switcher - N Pass setup |
| You then need to set the switcher to External Sync | Ross Crossover Switcher - How to set to External Sync |
Then you must set the Alpha channel for the CG up again. See this wiki.
You must also set the Chroma Key channel again. See this wiki.