| Locate your timeline that you are going to add your surround sound mix and |
|
| Export it go to >File>Export>Media |
|
Choose File Name Where to save it by clicking the Blue Type on Location Choose the Preset DNxHR/DNxHD MXF Op1a Resolution DNxHR HQ 8 bit Full HD 1920 x 1080 |
|
| If you have captions make sure you burn in with Captions Into Video |
|
| Then Choose Export |
|
| You will end up with a .mxf file like this |
|
Go to >File > Import that back into your project and we will use it later in this process  |  |
Next Import the 5.1 Interleaved File into your Premiere Project |
|
Select the file and import |
|
Click on the >File >New Item and choose Sequence |
|
Choose DNxHD HQ 1080 23.976 |
|
Click on the Settings TAB Leave all the settings as is but double check to match this frame grab shown here Then Name the Sequence at the very bottom DONT' HIT OKAY YET |
|
CLICK ON THE TRACKS TAB NEXT Click on the Tracks Tab and then delete the audio tracks DONT' HIT OKAY YET |
|
| Set Video to 1 track And change Mix from Stereo to Multichannel and set Number of tracks to 6 |
|
| Change the Track Type of the one audio track to 5.1 |
|
| Title the sequence "Title - Surround Sound" and click OK |
|
Next double click the .mxf file to load it into the source monitor and then drag just the video track down to the newly created surround sound timeline |
|
| Choose to Keep existing settings |
|
Then load the sound mix (5.1 Interleaved) file into the source monitor and drag the audio only tracks to the timeline Place on the 5.1 track in the surround sound sequence |
|
YOU will be only able to check audio tracks 1 and 2 so you won't hear dialog but hopefully you can tell well enough.The final check will be the QuickTime you will make next.REMEMBERDELETE THE 2 POP AT THE BEGINNING AND AT THE END |
|
Scaling YOU may HAVE TO SCALE YOUR FILE Click on your video file in the timeline Then click on Effect Control menu on the left hand side Drop down the Motion setting and on scale select that parameter and adjust |
|
Don't want to see this small black edge around your image Don't want this black line
|
|
No black line this is what you want
|
|
Make sure the sequence is loaded in the Timeline Window and then select the timeline window so it's Highlighted Blue |
|
Go to >File >Export>Media |
|
Choose Send to Media Encoder |
|
| On the "Format" pulldown choose QuickTime |
|
| Click on the blue "Preset" setting to change the QuickTime settings |
|
| Click on the Video Tab |
|
Video Codec Apple ProRes 422 |
|
Export Settings Format = QuickTime Preset = Custom Choose Export Video and Export Audio Click on the Audio Tab shown here Choose Basic Audio Settings Sample Rate 48 Sample Size 24 Audio Channel Configuration = Output Channels 5.1 L,R.C.LFE, Ls, Rs |
|
| Make sure Entire Sequence is selected |
|
| Click on the "Output File" name and that'll let you choose where to save |
|
| Navigate to where you want to save and click on Save |
|
| Click the green arrow in the upper right corner to start rendering |
|
