How to Add the Raise3D Printers to Netfabb

Owned by Courtney Morshed
Last updated: Jun 21, 2024
2 min read

After you install Netfabb and launch it for the first time, you must add the Raise3D printers.

Step-by-step guide

  1. Launch Netfabb

  2. Click "Add Machine" 

  3. Click "Create Custom Parameters"

  4. Enter "Raise3D Pro3" for the Machine Name

    1. "Raise3D" for the Manufacturer

    2. The Process Parameters are 300mm X 300mm X 300mm

    3. Click "Save Machine"

  5. Repeat steps 2 & 3 to ADD Raised 3D Pro3 Plus machines

  6. Enter "Raise3D Pro3 Plus" for the Machine Name

    1. "Raise3D" for the Vendor

    2. The Process Parameters are 300mm X 300mm X 605mm

    3. Click "Save Machine"

  7. Now you're ready to learn How to Perform the Netfabb Test