Connecting a Jetson to utexas-iot

How to connect a Jetson (or any computer!) to utexas-iot.

Step-by-step guide

For team members:

Log into the Jetson of concern.
Open a terminal using the shit+alt+t command.
Enter the following into the terminal
```
$ ifconfig
```
Look at the block that says enp0xx and copy the MAC address (denoted by "ether")
1. For example, DESPERADO's MAC address is 00:04:4B:A7:D7:6D.
Slack the MAC address to your team lead.
1. Your team lead will slack a passcode of form XXXX XXXX XXXX XXXX XXXX back to you.
Return to the terminal and enter
```
$ nmcli d wifi list
```
1. There should be one or two connections under the name utexas-iot.

Connect to utexas-iot as so

$ nmcli d wifi connect utexas-iot password <Password of form XXXX XXXX XXXX XXXX XXXX>

For leads:

Log into network.utexas.edu
Click "Register Wi-Fi Device".
Enter the device MAC address and device description:
1. For example: MAC Address: 00:04:4B:A7:D7:6D. Device Description: DESPERADO.
2. Set the Network Profile to "Unprotected"
  1. This allows you to ssh into the device.
3. Click "Register".
Return to the Wi-Fi Devices panel.
1. Click the eye next to the device you just named.
2. Copy the code and follow the directions above to connect the device to utexas-iot.