Lecture Capture in Classrooms

Using the Logitech Videoconferencing Equipment

Use the room system like you would be teaching your class during a regular day using the control panel and connecting your device or using the built-in MacMini.

You will need to sign in and launch your Zoom meeting to complete the following steps. The Logitech Group Camera setup can be used without using Zoom but for these instructions they will be used with Zoom. You can use this kit like a web cam.

-Connect the USB cable labelled WEB CAM to the device you are using.
• Using the built-in mac mini for the room system the USB cable will plug into the USB port in the front of the cabinet next to the instructor console.
• Using your laptop connect it to your USB port.
o If your laptop doesn’t have a USB port for the connection use the proper adaptor to connect the USB cable labelled WEB CAM.
You can check to see if the Camera and speaker phone are connected by clicking on the little up arrows in the lower left by the microphone icon and the camera icon. As shown below.
Microphone and Speakerphone should say Logi Group Speakerphone.

The Camera should be the ConferenceCam or Logi Group Cam.


You will be able to adjust the camera by using the arrow buttons and magnifying icons on the speakerphone or remote. There are 3 presets for the room that you may select that could suite your needs.