Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 13 Next »

Press the buttons on the left-hand side of the Crestron room scheduler in the order of top to bottom the first 4 buttons shown here.
Today = 1
Day < = 2
Day > = 3
Time = 4

Press them in sequence 1 – 4 (twice) in same order 1,2,3,4 (two) times

Press Save and Exit on the next menu that pops up.

The Crestron Touch Panel will reboot and should re-sync with the Outlook server and correct the scheduler to the current schedule

If the touch panel does not reset and connect, check the VLAN it is connected to is correct. Then check that the touch panel is set to the correct IP settings. Then make sure the IP table is setup correctly.
  • No labels

Confluence Documentation | Web Privacy Policy | Web Accessibility