CMB 6.102 - How to Operate Stage Monitors

Here are the monitors on the stage that the mixer will

calibrate the level and sound that the person on stage hears

Note that there are 4 monitors labeled here 1-4

Each monitor can get a custom mix assigned via the 

Soundcraft Monitor Mixer

The channels on the board are as follows

"A" Faders

Press A on the FADERS selection

Channels 1-24 are patched in via the stage Snake

shown here

Channels 25-28 are the wireless mics 

Yellow = 25

Red = 26

Blue = 27

Green = 28

Crestron and Bluetooth inputs are on the "B" faders 

Press "B" FADERS to access this

"B" FADERS start with 

Crestron L and R on Channels 31 and 32

Bluetooth L and R on Channels 33 and 34

To send a mix to one of the monitors on stage

Press Mix 1 - 4 depending on what monitor you are mixing 

Then turn up the FADERS on A and B for what ever input you would

like to send to the monitor

In this ex: we are sending Crestron L and R to Mix 1

Also make sure that the Mono/SEL fader is turned ON and up to zero

SEL doesn't have to be on unless you want to access

the EQ/HPE/Gate or Comp