OUTLINE FOR OS-SPECIFIC PAGE
This page is intended to cover things about EPM that are specific to Jamf / macOS
How to fill in the page (notes for sys admins):
Italicized parentheticals describe what info is anticipated under that heading.
Add headings or subheadings as needed
Rephrase headings
Any pages linked throughout are just for convenience
Below this line is where the public-facing content begins
Apple device management (for macOS and iPadOS) is done using the central EPM tool Jamf. This page currently focuses on macOS computers.
Expand | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
|
Compatibility with Endpoint Management
Supported Operating Systems
EPM and Apple only support the latest 3 operating systems.
Currently supported operating systems:
macOS 14 Sonoma
macOS 13 Ventura
macOS 12 Monterey
Hardware
Compatible hardware to run the minimum required OS (macOS 12 Monterey) can be found here:
UT Self Service & CNS IT Support Hub
To open UT Self Service:
Find it in the Applications folder at /Applications/UT Self Service.app
Directly access it from the CNS IT Support Hub or Jamf Connect menu bar icon drop down menus.
To find CNS IT Support Hub:
Click the UT Tower icon found on the right side of the Status Bar
UT Self Service
Installed on all managed computers, UT Self Service is a curated app catalog that provides three main benefits to employees:
Install & Update Third-Party Apps
A number of the most commonly used third-party apps are available to install through UT Self Service at the click of a button and without needing admin permissions. Apps will be kept up to date for you by CNS OIT.
Here’s a few popular apps available through UT Self Service:
Google Chrome
Mozilla Firefox
Slack
Zoom Workplace
Box Drive
For a complete list of the apps available to you, check UT Self Service.
Support Utilities for System Information
There are also support utilities within UT Self Service that can be run to:
Get an overview of the computer’s information,
Find your VPN IP address,
View app install history,
Get basic network diagnostics,
and more
Bookmarks to UT Sites
Finally, UT Self Service has bookmarks to commonly accessed University sites, including:
Central ITS Service Status,
The CNS OIT wiki,
CNS IT Help Desk Help Form,
UT Mainframe,
Stache,
Remote Support portal,
and more
CNS IT Support Hub
The Available on macOS computers managed by CNS OIT, the CNS IT Support Hub provides quick access to:
Computer information:
Computer name,
Computer model,
Serial number,
Current version of macOS installed,
Last reboot date, and
Storage used.
Links to:
Submit a help desk ticket with CNS IT,
Open the ServiceNow website,
Open the UT Self Service app, and
Launch Cisco Secure Client to connect to the UT VPN
A notification icon will be displayed on the CNS IT Support Hub when:
There are software updates available for the computer,
The computer has not restarted in over 14 days, or
The computer’s storage capacity reaches 90% used.
Logging in with your EID
You can login to your computer using your EID and EID password. This creates a standard user profile (an account without admin permissions).
Logging in for the first time
You will be prompted with a Microsoft Single Sign On page where you’ll sign in using your IID as the email address (YOUR_EID@eid.utexas.edu).
NOTE: You must be connected to the internet. However, the utexas WiFi on campus won’t work because it can’t be connected to from a computer’s login screen.
If the computer was just restarted or you are being prompted for a username and password, it’s likely that FileVault needs to be unlocked. Someone who has logged into the computer before will first need to use their EID and EID password to sign in.
Screenshots of what you may see are on this page: Jamf Connect - Endpoint Client Settings
If you’ve logged in before
Select You can login using the Microsoft login, or select “Local Login” at the bottom of the screen and sign in with your EID and EID password.
After a restart or turning on the computer you’ll be prompted with a login page for FileVault. Enter Select your account, then enter your EID and EID password.
Logging in after changing your EID password
If you changed your EID password from your computer, the FIleVault password will automatically update and you’ll be able to login to your computer using your new EID password immediately.
If you changed your EID password from a different device and the computer is turned off, contact CNS IT to receive assistance updating the FileVault password to match your new EID password. In the meantime, you can continue using your old EID password to login to your computer.
Administrative Access
If you need to install software or make changes to your computer’s settings that require an admin username and password, administrative access can be used. You’ll remained signed into your standard account (EID login) the whole time.
Using an admin-eid account
Your admin-eid account would've been created for you by CNS OIT, most likely during computer deployment.
The username will be admin-YOUR_EID and the password is one you created. If you don’t remember your admin password, check Stache or contact CNS OIT.
When prompted for administrative credentials, use your admin username and password.
NOTE: The computer is designed to malfunction if an admin-eid account is logged into from the login screen.
Using Make Me an Admin
Open UT Self Service and find the Make Me an Admin policy under Utilities or by searching for it. Click ‘Run’ to elevate your user account to an administrator for 15 minutes.
Once run, use your EID and EID password when prompted for administrator credentials.
NOTE: Run the Make Me an Admin policy before opening the app where admin permissions are needed— i.e. after running Make Me an Admin, then open Terminal to run sudo
commands, launch the installer to run an app, or open System Settings to change a setting.
All actions performed during this 15 minutes are logged for IT reference.
Restarting or shutting down the computer will not circumvent the 15 minute time limit.
Installing and Updating Applications
By default, CNS OIT installs:
Rosetta 2
Cisco Secure Client (Cisco AnyConnect)
CrashPlan (Code42)
Microsoft Defender
Microsoft Office
Tenable Nessus
Third party applications available from UT Self Service will have updates installed automatically— regardless of if they were installed from Self Service or independently.
Some updates will be installed silently in the background with no user interaction, while others may display a notification in Notification Center that the app needs to be quit for the update to be installed. If a notification is displayed, you’ll have four days to defer before the app is forcibly quit an and updated.
For an example of what an update notification looks like, see: Jamf Application Patching End User Experiences
Operating System and Application Security Updates
Using EPM, CNS OIT manages the installation of security updates for your computer’s operating system and certain applications.
When new updates are available for macOS you’ll receive a notification in the form of a window in the center of your screen. You have 6 days to defer the notification and install the updates before the notification becomes persistent and you are forced to update without any further options for deferral.
To see what this looks like, refer to: Jamf OS Patching: UT Macintosh Security Updates and Reboot Policy
For steps to check for updates and upgrades on your own, see: macOS Updates and Upgrades
Additional information about why keeping your computer up to date is important is provided here: Restart and Update Your Computer: FAQs