Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info

The GLT printers are locked down using individually assigned ID and PIN. Do not share your ID and PIN with anyone else. Print usage is tracked per individual.

If you have not been given an ID and PIN, please submit a ticket to mech-it@austin.utexas.edu to request access to GLT printers.

1.

...

Image Removed

2. In the address bar near the top of the File Explorer window, type in \\me-print1.austin.utexas.edu\ and press Enter.

Image Removed

3. Locate the printers ME-GLT-Floor-2-Cano and/or ME-GLT-Floor-3-Canon near the bottom of the list of printers that appear in the folder.

Image Removed

...

Left-click the “Windows” (aka Start) icon at the bottom left of the screen and type in "Software" and select "Software Center"

Image Added

2. Make sure you are viewing the Applications section (left side) and find the two available GLT printer installations. Select the desired printer.

Image Added

3. You will see the next window where you can click Install.

Image Added

4. The printer will install and you will see a greyed-out "Uninstall" button when finished.

Image Added


5. Once the installation completes, verify the printers were installed by going to Start and typing "Printers" and then selecting "Printers & scanners"

6. In the Printers & Scanners window you should see the printers installed as ME-GLT-Floor-2-Canon

...

and ME-GLT-Floor-3-Canon

...

. See step 7 to add your ID/PIN at this point.

 Image Added

7. Follow these steps to add your ID and PIN.