Page Comparison

Load the Mini DV cassette you want to dub. Make sure its erase protection switch is set to “save”.

Turn the monitor on.

 Image Added

Each device has a number on it (Ex: "4 - MiniDV to DVD").  On the switcher below the monitor, select the number of the device you are using.

 Image Added

Cue the MiniDV tape up to where you would like to begin your recording.  Do this by using the play and fast forward/rewind buttons.

Find the remote that corresponds to your device.  The remote is labeled with the same name as the device.

 Image Added

On the remote, press DUBBING to access the Dubbing Menu screen.

Press Arrows buttons on the remote to select DV ? DVD, then press ENTER.

Image Added
  Image Added

Select ENTER, then press ENTER.

 Image Added

Press ? twice to select CONFIRM then press ENTER.

 Image Added

EXECUTE will be highlighted then press ENTER.

• Once dubbing starts, it will continue dubbing until the end of the tape is reached.
• To cancel the dubbing, press STOP then ? , ? to select CANCEL and press ENTER to confirm.
• If the tape is not rewound, the unit will start dubbing after automatically rewinding the tape to the beginning.
• Press RETURN to move back to each screen and make changes to previous settings before dubbing begins.

 Image Added

When recording is complete, press SET UP to start finalizing the DVD.

Using the keys on the remote control, navigate to the SetUp tab. ? , ? , ? HDD/DVD/DV SET UP tab.

? , ? , ? DISC SET UP box.

? FINALIZE then press ENTER.

? , ? , ? , ? Blue menu screen then press ENTER.

? OK then press ENTER.

? OK then press ENTER.