Go to >Apple> System Prefs | |||||||
Choose EUCON | |||||||
Choose the Network Interface Ethernet 2 | |||||||
Go ahead and Stop the EUCON application by clicking on Stop. |
| ||||||
Once stopped Click Start to start the application | |||||||
Once the application is running Choose the EUCON application and go to >Window> | |||||||
The Surfaces control setting should look like this | |||||||
Workstations Tab should see the computer that is connected | |||||||
Open ProTools>Create Session or open existing session | |||||||
Choose Create Blank Session and or Open an existing session | |||||||
Go to >Setup> | |||||||
Choose to Enable EUCON | |||||||
Lastly choose to lock the application to Protools by clicking on the checkboxes at the bottom of the Assign Tab | |||||||
ProTools will ask you where the Waves Plugins are. Go to Applications> | |||||||
If you would like to import a .aaf file use this workflow wiki.
| https://wikis.utexas.edu/display/comm/ProTools+-+Open+a+.aaf+or+.omf+and+Quicktime+in+ProTools | ||||||
Title the session and choose a destination to save the session. | |||||||
Go to >Setup >Session>and change the Clock Source to SYNC HD | |||||||
SYNC Clock Reference is now Locked | |||||||
Next go to >Setup>Playback Engine | |||||||
Choose HDX | |||||||
Next go to >Setup>Hardware | |||||||
Go to Main Tab | |||||||
Analog In Tab should be set to this | |||||||
Analog Out tab should be set to this> | |||||||
Go to the Monitor Tab and make sure the MAIN AND ALT are set to "None" as shown here | |||||||
Mixer settings | |||||||
| |||||||
Click on Output Tab | |||||||
Click on Import Settings | |||||||
Navigate to the ProTools 4 or ProTools 5 Storage> If you can not find it use the magnifying glass to search | |||||||
Yes to Delete existing unused paths? | |||||||
Output will change to the default 5.1 surround settings as shown here | |||||||
Next Import the video into the project | |||||||
Navigate to the video file that you want to view in the ProTools session | |||||||
Choose New Track | |||||||
Choose to import at Session Start | |||||||
Choose to enable the Video Engine | |||||||
If you would like to use the audio off the video file choose to save it to the default Audio Drive folder | |||||||
Video Engine will launch and you should be able to see the image on the projector automatically | |||||||
| |||||||
Once the track is imported into the ProTools session change the format of the clip to 720p/23.976 so it plays out to the projector. | |||||||
Next make sure the Video Track is Online and that the menu states that Video Hardware is Enabled. If Disable Video Hardware is showing it is okay | |||||||
Next Go to the Output and set all the tracks to Main (5.1)>Main |
Page Comparison
General
Content
Integrations