...
| Multimedia | ||
|---|---|---|
|
This is how...
You will need: -Soundcraft Performer SI3 mixer -iPad -ViSiRemote App for iOS (only works on iPad) -ViSiListen App for iOS (works on iPhone and iPad) -Wireless Router | |
| Plug the router into the back of the Mixer. In HiQnet port. The plug on the router should not be WAN (Internet), it should be LAN. |
 |
| Press System |
|
Make sure the board has an IP address. You can set it to static if you know what you're doing, but here we have set it to DHCP because it makes things easier. If your mixer board does not have an IP address restart the mixer by holding the power button for 3 seconds and then pressing the button again, to power off. Then press the button once to turn on. Do this while the wireless router is on. |
|
| Choose HIQnet from the main menu of the mixer board. |
|
Enable HIQnet. You'll have to reboot to apply. Enable Access Control. Tell Device 1 to have "All" Then you will need to find the HIQnet number in the next step |
|
| On the iPad under settings scroll all the way down to "ViSiRemote" |
|
Things to know:
ViSiRemote is for main mix and more of a total control
ViSiListen only allows access to monitor mixes
Under the access section of the mixer, this is the gatekeeper. So, even if someone has the password to the wireless and the Apps, they will not have control unless the HIQNet number of their controlling device (iPad, iPhone) is entered and has access to that individual mix or "All".
So, you could set up Mix1 to just the drummers iphone, and Mix2 to the bassist and Mix3 to the lead vocals, Mix4 to guitarist, and Mix5 to the bassist...with each iOS device having a separate HIQnet number they can only get to thier mix and not mess up anyone elses.