Page Comparison

Place the .aaf file and the QuickTime on to one of the
storage drives of the computer. Don’t try to use these files when saved to a DVD or the Classes/Transfer servers.
    
      
Launch
ProTools and click >on the "Open from Disk"

Navigate to the .omf or .aaf file, select it and click open.

Choose the following SessionParameters

Type: Session
   
Audio File Type:
.BWF (.WAV)
       
24 BIT
            
Sample Rate:
48 kHz

Location > Navigate to where you want to save the session

In the next window make sure all tracks are selected for import and check import clip gain and import automation and “Uncheck” (pan odd tracks left and even tracks right) Settings look like this:

ALSO WHEN OPENING AN .aaf or .omf MAKE SURE that “Copy from source media” is selected in Audio Media Options.

On the next screen choose not to save a report. (if that dialog appears)
            
                      
                     
              
The Protools Session will open and all the tracks will appear as they did in the video project.

Now click on >Setup>Session and make sure the frame rate is
consistent with the frame rate of your Final Cut or AVID video project. Turn pulldown on ONLY if you worked in AVID in a 24 (not 23.98 but 24) frame project.

Sample Rate 48

Bit Depth 24

Clock Source Sync HD (if in an HD suite)

TimeCode 23.976 all settings

           
                
                   
Import the QuickTime movie to chase in the ProTools project.

Go to >File>Import>Video and navigate to the QuickTime file saved on the storage drive and select it.

Navigate to the QuickTime Movie that you made using this workflow

AVID - Prep and Export .AAF and QuickTime Movie to ProTools Advanced Version

The dialog will ask you where to put the newly imported Video track. Select “New Track” and click OK

Choose to Import the audio from the QuickTime so you can check sync

Choose the default location of where to save the audio files.  It will always choose the current session's audio files folder.

Click Open

12. Check to make sure that the session is in sync with the video.
Play the Protools session and watch the QuickTime to check sync.

You can add quarter frames to the Video Sync Offset but usually not necessary to sync up

image and sound.  This was common with DV-NTSC but no longer necessary when using HD QuickTimes