This wiki shows how to use the PTZ auditorium center camera without using the ATEM Switcher
Side note, if you notice the black magic web presenter flashing a black screen every 5 minutes or so, the fix is to cycle the web presenter
| Leave the BlackMagic Design ATEM switcher unplugged |
|
Video Patch Panel patch whatever camera you want to use in zoom to the Blackmagic WebPresenter |
|
Example: Patch Cam2 - DA OUT for the center camera output |
|
| patch into the AV Closet Program Recorder |
|
For Audio we are going to use AUX 3 and AUX 4 to route audio |
|
| Press AUX 3 |
|
When you press AUX 3 the board will read SEND to Cam2 L (AUX 3) |
|
| Press AUX 4 |
|
When you press AUX 4 the board will read SEND to Cam2 R (AUX 4) |
|
Example: Press AUX 3 and 4 Turn up all 4 mics to route audio to the camera 2 L and R There is also the audience mic if you would like to use it Master Fader up as well |
|
