...
How to make a 4:3 DVD from High Def or Standard Def Media
2. Use >Current Settings and make sure that “Make Movie Self-Contained is unchecked
...
4. Click on “Add File” and navigate to the QuickTime Reference that was just made.
5. Select the DVD encoding settings to apply. Go to the Settings Tab>Apple>DVD>DVD:Best Quality 90 minutes. Drag the two files from this folder to the “Batch Window” to apply the encoding settings.
6. Select the MPEG-2 clip to change the properties of the encode in the “Property Inspector” 
7. The Inspector window will show the settings for the MPEG 2 that is going to be encoded. If you don’t see the inspector window go to >Window >Show Inspector
8. Set the MPEG 2 encoding settings: Click on the Video Format tab and that should show the native information about the file. Will show the format, frame rate, aspect ratio, and native field dominance of the quicktime (SD will be lower field HD will be upper.)
9. Now click on the Quality Tab.
10. Mode should be set to Two pass VBR Best. Change the Average Bit Rate to 6.5 and the Maximum Bit Rate to 7.7. Change Motion Estimation to Best.
11. Then click on the GOP tab and change the GOP Structure to IP and the GOP size to 6
12. Choose the Destination for the mpeg2 file to be saved. Right click “Source” in the “Batch Window” and set the Destination to Source (where it defaults) or other and then save it to another folder if needed.
13. Click “Submit” and then “Submit” again at this menu.
14. The file will start to encode to an MPEG 2 that we will use in DVD Studio Pro. To check the status of the encode launch the “Batch Monitor”
15. Click on “This Computer” to show the processes of the encode
16. Launch DVD Studio Pro.
17. Go To DVD Studio Pro > Preferences
18. Go to the Encoding tab and change the Aspect Ratio to 16:9 HD OR 4:3 SD for non wide screen DVDs
...
21. Motion Estimation should be set to Best
22. Make a new project
23. Go to Window>Configuration>Extended to change DVD Studio interface
24. Import the MPEG 2 made in Compressor, Quicktime reference file or Quicktime movie into the Assets window
25. Drag the MPEG 2 and the AC3 file or QuickTime from the ASSETS tab to the Track timeline. Audio should match video exactly.
26. Click on the Outline tab (1) next to the Assets tab then click on the UNTITLED_DISC (2)
27. Then click on the Disc Properties Menu then click on First Play>Menu 1 > Track 1 >Chapter1 
30. Once the DVD is built choose Format to burn the DVD
...
32. Click “Choose” to chose the “Current Source” for the DVD.
33. Navigate to the location that the DVD VIDEO_TS AND AUDIO_TS folders are stored and click “Choose”
34. Then click “Burn” to start the DVD burning process
35. Put a blank DVD into the burner to burn the DVD material
