Page Comparison

...

Step-by-step installation guide for UT ChE students enrolled in a course utilizing @risk

Once your EID has been submitted by your professor, you will need to complete the following steps:

NOTE: UTGUEST AND EDUROAM WIFI WILL NOT WORK.  You must be connected to UTEXAS WIFI or with a VPN connection.

1. Map a drive to your computer using the following path in the "folder" field  \\austin.utexas.edu\disk\che-share\Palisade . The Drive letter doesn't matter.  If you are unsure how to do this,

   Search “how to map a drive Windows 7” or “how to map a drive Windows 8”10”.  Make sure to uncheck "reconnect at login" and to check "connect as a different user".Image RemovedImage Added 
2.  For the username, enter austin\your EID  e.g.,
3. Image RemovedImage Added  
4. Note: Attempting this from on-campus will work best.  If you are off-campus you must first follow these instructions to make a VPN connection, and then proceed with the instructions. http://www.utexas.edu/its/vpn/
5. Once you are connected to the remote folder > right click > run as admin > follow all of the Palisade installer prompts.

1. , you should see the following two files:

         Image Added

     6. Copy both files to a new folder on your computer's desktop, then open that folder and run the "DTSuite8-cust-Setup.exe" installer. The "Palisade_Course.lic" file MUST be present in the same folder as the setup file, or the installation will fail.

Related articles