Plug in the DC Power if you want to not use Batteries | ||||||||||||||||||||||
Turn the Camera On | ||||||||||||||||||||||
Put the SDHC cards in the slots. One or two cards. | ||||||||||||||||||||||
You have to close the doors of the card slots or else the camera won't recognize the cards | ||||||||||||||||||||||
Click the Menu Button Also use the the joystick to navigate the menus | ||||||||||||||||||||||
Navigate to the "wrench" icon and choose Reset Resetting the menus gets the camera back to a default state so you know everything is reset to a starting point | ||||||||||||||||||||||
Choose System Setup >Reset >All Settings | ||||||||||||||||||||||
OK | ||||||||||||||||||||||
Set the Date and Time | ||||||||||||||||||||||
Navigate to the Media icon page 1 Set the System Frequency to 59.94 | ||||||||||||||||||||||
Navigate to the Media icon page 1 Set the System Frequency to 59.94 | ||||||||||||||||||||||
Same menu page 2 set the Frame Rate to 23.98 | ||||||||||||||||||||||
Next format the SDHC cards Same Media Menu Page 1 Choose Initialize Media | ||||||||||||||||||||||
Choose which card to format | ||||||||||||||||||||||
Choose Complete formatting | ||||||||||||||||||||||
Click OK to confirm | ||||||||||||||||||||||
Same media page choose the Main Recording Format as MP4 | ||||||||||||||||||||||
Same media page choose the Main Recording Format as MP4 | ||||||||||||||||||||||
Media Menu Page 2 choose Resolution as UHD 3840 x 2160 YCC420 8bit | ||||||||||||||||||||||
Go to Media Menu Page 3 and Choose to turn on Relay Recording this will enable the recording to span the two SD cards if you have two loaded | ||||||||||||||||||||||
Navigate over to the Image menu and choose to turn on Canon Log 3 if you want to record in Log Or BT709 if you don't want that log setting | ||||||||||||||||||||||
Auto Focus On or Off Turn ON if you want to use the Face Detection. That is useful to make sure you keep faces in focus. | ||||||||||||||||||||||
Auto Focus ON Go to the Camera Menu Page 5 Face Detection Turn it ON | ||||||||||||||||||||||
Face Auto Focus choose Face Priority | ||||||||||||||||||||||
Back One page on page 4 on the Camera Menu | ||||||||||||||||||||||
Choose AF Frame Size Large | ||||||||||||||||||||||
To change Brightness ISO/Gain Click on the ISO/Gain on the side of the camera wait till you see the red scale on the display | ||||||||||||||||||||||
Then use the Joystick on the LED display and move it up and down to adjust the level of light coming into the camera | ||||||||||||||||||||||
You can also use the Joystick on the back of the camera and move it up and down to adjust the brightness level | ||||||||||||||||||||||
Audio Settings on the side of the camera you can plug in XLR cables for external 2 Audio inputs Input 1 set on Analog Choose Mic +48 for a microphone that needs phantom power If a Mic has a power source like a battery choose Mic Mixer Board input would be Line Level | ||||||||||||||||||||||
Input 2 Audio Settings on the side of the camera you can plug in XLR cables for external microphone inputs Input 1 set on Analog Choose Mic +48 for a microphone that needs phantom power If a Mic has a power source like a battery choose Mic Mixer Board input would be Line Level | ||||||||||||||||||||||
Then click Menu again and look at the "Audio" page Joystick 3 tabs over on Page 1 Select Ch1/Ch2 Input here Good advice is to set channels 3/4 to the on camera microphone Manaural Mic | ||||||||||||||||||||||
Good advice is to set channels 3/4 to the on camera microphone Manaural Mic | ||||||||||||||||||||||
Finally Record Button press to record and to stop recording | ||||||||||||||||||||||
If you want to look at the recorded data on the card Switch the Power button to Media | ||||||||||||||||||||||
Here you will get Thumbnails of all the media Use the Joystick to toggle through the clips and press selected clip to play the clip |
Page Comparison
Manage space
Manage content
Integrations