...
| Plug your mic into one of the first 4 inputs of the mic snake. |
| |
Open the ADR Template in the "Templates" folder on the "tempstorage" Drive Open UT_ADR_Template.ptx |
| |
SET THE INPUT ON THE TRACKS On the Track Labeled "ADR_001" Make sure that the input matches the mic input that you plugged your mic into on the "Snake." Click on A1 and change it to A1, A2 or A3 or A4 depending where you plugged in on the "Snake" |  | |
SET THE OUTPUT ON THE TRACKS Click on "Main" and set the output to Main (5.1>A 1-2 Stereo)
|  | |
| ||
Plug Headphones into the headphone splitter. This device is located under the desk to the right in the rack Make sure it is turned ON - sometimes it gets turned off |
| |
The headphone jacks 1-4 control the volume for the "Talents" headphones that are plugged into the snake |
|
|
Plug your headphones into the headphone amp 5-8 under the rack under the console and adjust the "Input Level" so you can hear audio in your headphones comfortably once you start testing levels coming into ProTools later in this doc. |  | |
VERY IMPORTANT when you are recording you need to MUTE the sound System or you will get BAD FEEDBACKPress Mute All on the surround sound Monitor |
|
...