...
1) Submit the BIC MRI Training Request form to be logged into our database and initiate the L0 training process.
2) Download the Level 0 MRI User Training Packet from the BIC Wiki and complete under the guidance of your PI / supervisor.3 You will complete the first page and attach as additional pages to the packet either certificates or screenshots requested for the following sub-steps:
a) For human MRI studies, CITI Human Subjects Protection (HSP) training must be completed, and the user must be named on the study IRB protocol, with a screenshot provided.
(Instructions here)
For preclinical MRI studies, ARC training must be completed, and the trainee must be named on the IACUC protocol.
...
b) Complete the online UTLearn course for MRI Safety Basics:
BIC-MRI: 101A (for our 3T Siemens Skyra system in NHB),
or BIC-MRI: 101B (for our 3T Siemens Vida system in HDB)
(Note: For the 7T Bruker preclinical system, either course may be taken.)
...
c) Complete the MRI Safety Screening form for Personnel: a member of BIC staff will review (sometimes it take a few days: please don't keep submitting duplicates.) Once reviewed, you'll get email confirmation if you screen safe to enter MRI Zone 3.
6) Attach pdf copies of your CITI / ARC and BIC-MRI:101 training certificates, confirmation of IRB / IACUC status, and the confirmation email of MRI Safety Screening to the Level 0 MRI User Training Packet. 3) Once step 2) is complete, send to your faculty advisor for their signature.
4) Rename the completed Training Packet as your FIRSTNAME_LASTNAME_L0.pdf 7) .pdf . Submit your L0 MRI User Training Packet to: bic-training@utlists.utexas.edu
...