Go to >Apple> System Prefs | |
Choose EUCON | |
Choose the Network Interface Ethernet 2 | |
Go ahead and Stop the EUCON application by clicking on Stop. | |
Once stopped Click Start to start the application | |
Once the application is running Choose the EUCON application and go to >Window> | |
The Surfaces control setting should look like this | |
Workstations Tab should see the computer that is connected | |
Open ProTools>Create Session or open existing session | |
Choose Create Blank Session and or Open an existing session | |
Go to >Setup> | |
Choose to Enable EUCON | |
Lastly choose to lock the application to Protools by clicking on the checkboxes at the bottom of the Assign Tab | |
ProTools will ask you where the Waves Plugins are. Go to Applications> | |
If you would like to import a .aaf file use this workflow wiki.
| https://wikis.utexas.edu/display/comm/ProTools+-+Open+a+.aaf+or+.omf+and+Quicktime+in+ProTools |
Title the session and choose a destination to save the session. | |
Go to >Session >Setup>and change the Clock Source to SYNC HD | |
SYNC Clock Reference is now Locked | |
Next go to >Setup>Playback Engine | |
Choose HDX | |
Next go to >Setup>Hardware | |
Go to Main Tab | |
Analog In Tab should be set to this | |
Analog Out tab should be set to this> | |
Go to the Monitor Tab and make sure the MAIN AND ALT are set to "None" as shown here | |
Mixer settings | |
| |
Click on Output Tab | |
Click on Import Settings | |
Navigate to the ProTools 4 or ProTools 5 Storage> | |
Yes to Delete existing unused paths? | |
Output will change to the default 5.1 surround settings as shown here | |
Next Import the video into the project | |
Navigate to the video file that you want to view in the ProTools session | |
Choose New Track | |
Choose to import at Session Start | |
Choose to enable the Video Engine | |
If you would like to use the audio off the video file choose to save it to the default Audio Drive folder | |
Video Engine will launch and you should be able to see the image on the projector automatically | |
| |
Once the track is imported into the ProTools session change the format of the clip to 720p/23.976 so it plays out to the projector. | |
Next make sure the Video Track is Online and that the menu states that Video Hardware is Enabled. If Disable Video Hardware is showing it is okay | |
Next Go to the Output and set all the tracks to Main (5.1)>Main |
Skip to end of banner
Go to start of banner
ProTools – HD Suites Surround 5.1 Session Start up with the AVID Artist Interface
General
Content
Integrations