DMC 5.208 - Allen & Heath Workflow

The new workflow is designed so that the producer only has to navigate 3 different mixes. The board should stay on the same Layer (Layer A). Inputs 1-10 are different microphone options, Crestron output, and ceiling microphones. Next to the master fader are the outputs that control the master fader for each mix.

The producer should navigate the different mixes to control the individual input levels getting sent to the output. The "default settings" for each mix are shown further below. 

INPUTS:

These are the labels for inputs 1-10.

OUTPUTS:

These are the labels for the 3 outputs.

Ceil: Ceiling outputs. This is what you hear in the room.

Record: This is what gets recorded to Blackmagic.

Zoom: This is what gets fed to "USB Audio Device" in Zoom.

MIXES:

These are the mixes that control the levels for each output.

MIX 1: CEILING

Default settings for the Ceiling output.

MIX 2: RECORD

Default settings for the Record output.

MIX 3: ZOOM

Default settings for the Zoom output.