Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

NOTE: IF YOU HAVE TWO TRACKS L TRACK AND A RIGHT TRACK THEN USE THE NORMAL AUDIO IMPORTING WORKFLOW AND PAN THE TRACKS LEFT AND RIGHT IN AVID. THE AUDIO WILL COME INTO AVID PROJECT MONO AND MUST BE PANNED. See this wiki doc 
USE THE FOLLOWING WORKFLOW FOR A SINGLE FILE that was exported stereo interleaved.

Mac 

Windows > File > Settings


Step One – Make sure you AVID Project is set to 24 bit audio.

Go to the Project Window and click on the Settings tab


Click ON Audio Project

Choose the "Main" tab and make sure the Sample Rate is 48 and the Audio File Format is set to PCM (MXF) 24bit


Close this settings dialog by clicking on the "red" x to close

Import the Stereo or 5.1 audio into the project

Go to >File>Import> or Input (8.5) Import Media

Click on Options

Click on the Audio Tab



Make sure the audio looks like this
 

Turn off Autodectect Broadcast Wave Mono Groups

Turn Off Subframe Alignment to Broadcast Wave Start Time



Next click on the "Edit" button.


You have to tell the AVID software to make channels A1 and A2 into a stereo file.

Choose the stereo option in the pulldown.

This is how a stereo import setting looks.


Click OK again to leave the Audio Import Tool

Navigate to your audio and click Import


Select 23.98 as the timecode most likely and OK to all clips



  • No labels