Calibrating the KCP Touch Screen
In case the touch screen on the SmartPad is off, the following are instructions on how to recalibrate the KRC4 KCP (KUKA SmartPad).
You'll need a USB keyboard to accomplish this.
Step 1 - Plug in the USB Keyboard
Open the cover on the back of the KCP to expose the USB ports.
Plug the USB Keyboard into the port
Step 2 - Turn the Mode Selection Key
Turn the key at the top of the KCP to bring up the mode selection screen
Step 3 - Press the Menu Button
Press the physical menu button at the bottom right of the screen.
Step 4 - Start the Calibration
Press the "Display" option, followed by "Calibrate" to begin the calibration process.
Step 5 - Calibrate the Screen
Follow the on screen instructions in order to conduct the screen calibration. There is a stylus in the handle of the KCP if needed. Once complete, it will prompt you to use the keyboard in order to save or discard the new calibration.
Step 6 - Close the Menu
Once you are done, return the selection key (shown in step 2) to its original position.