Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Current »

A gentle (smile) introduction to hexadecimal (base 16).

Decimal numbers

In our standard decimal system each digit (which can be 0,1,2,3,4,5,6,7,8,9) in a number represents a power of ten in that place:

Hexadecimal numbers

The hexidecimal (base 16) system is similar, except that each digit represents a power of 16 in that place.

Because a digit can have values greater than 9, there are additional digit symbols allowed in hex:

  • A (10), B (11), C (12), D (13), E (14) and F (15)

To convert a decimal number to hex, you remove multiples of those powers of 16 as shown below.

Binary numbers

In the binary (base 2) system, each digit is a power of two, and the digits are just 0 and 1.

It's easy to translate a hexadecimal number into binary because you can decompose each hex digit into its 4 bits.

The benefit of using hexadecimal instead of binary, is that hex is much shorter to write, but still lets us easily determine the value of specific bits.

Octal numbers

Another popular base in the computer world is octal – (base 8) where each digit is a power of 8, and digits are 0, 1, 2, 3, 4, 5, 6, 7.

Octal is more compact than binary, but less compact than either decimal or hexadecimal.



  • No labels