4. Click the Connect icon. If your VPN client does not have an entry for UT, add one for vpn.utexas.edu.

5. Enter your eid and eid password and your DUO Passcode

7. To connect to "temp_transfer" or "class_folders"

From the “Finder” or click on the desktop of your computer and click >Go>Connect to Server or click “apple K”

8.  Type in smb://fileserver2.moody.utexas.edu
Click Connect

9.  Type in your User Name and Password. your UTEID is your username and your password is the UTEID password

10.  Select the share to mount. Click OK and the share will mount.

To mount the editshare you need to have the client installed. Make sure that you are connected to vpn.utexas.edu

following the above workflow.

http://172.17.66.133/clients/ESC/

Click on the above link to download the clients for windows and mac and install it.

Install the software for Cisco VPN shown at the top of this wiki

Make sure you are connected to the internet

From the >Start menu>All Programs> launch VPN Client "Cisco AnyConnect Secure Mobility Client

If the software does not have an entry for the UT VPN, type "vpn.utexas.edu". Click the Connect icon

Enter your user name (eid) and password (eid password) and

Status should read like this.  Now connect to the shares normally.

Right click on "This PC" and choose Map network drive

Type in the UN: which is your UTEID with AUSTIN\ in front of it.  Your password is your UTEID password. It should look like below.

User name: AUSTIN\uteid

Password: UTEID password

Choose to remember my credentials

Click OK to mount the volume.

You will see the Network volume mount as show here.

And you should be able to access the data on the volume.

To mount the editshare you need to have the client installed. Make sure that you are connected to vpn.utexas.edu

following the above workflow.

http://172.17.66.133/clients/ESC/

Click on the above link to download the clients for windows and mac and install it.