AVID - RED Linking and Transcoding workflow for Creating Offline Edit Project

Step one is to create a AVID Project

This window will allow you to set where you are setting the AVID project

Choose the folder icon to select where the project will go

Recommended - choose External and save to your external hard drive.

Create a "New Project"

Name the project

Choose the "Format"

This MUST match what you shot

If you shot 23.98 choose 23.98 if you shot 24 choose 24

IF YOU DON'T KNOW PLEASE ASK FOR HELP FIGURING THIS OUT. Choosing the wrong frame rate will cause failure of relinking to r3d files in Online.

In AVID Choose
>Tools>Source Browser

Choose your folder on the card or hard drive that has the RED footage and choose Link

The files will load into a BIN

Next access the source settings

Right click the files in the bin and select
Set Source setting

Set a lower R3D Source Quality Setting.

Choose Low
Debayer Detail to speed up the transcode

You can manipulate the look of the file but it doesn't change the original files just adjusts the offline file

Click OK

Select all your clips in the bin to transcode

Go to >Clip
>Consolidate/Transcode

Choose to "Transcode"



Pick a drive to save the files to under the
"Video/Data" setting

Choose the "Target Video Resolution"

Choose DnxHD 36 for offline quality

Click "Transcode" to start transcoding

After the transcode process is complete, new master clips are created in the bin that point to the transcoded media.
Now you can edit your offline media.

The Resulting clips will have the following settings.
DNxHR LB is the codec and the clip aspect ratio is 2048 x 1080 at 23.976 fps. This is the original aspect ratio of the clip.

Move all the transcoded files to their own bin and close the AMA linked files bin because we will use that bin when we do the final conform to the "Native" files.

The next step is to organize the files by shoot day then use this
wiki to sync the footage.

https://utexas.atlassian.net/wiki/display/comm/AVID+-+Syncing+Audio