DMC 3.206 Amplifier - Amp Power Outage - How to Turn on Power Sequencers

No audio on Teaching Station microphones or speakers are off???


You have AMPs off most likely


Go to the room where tech staff stores the

Lectern in the back hallway to the left of the DMC 3.206 Screen in the Amp closet


Locate Circuit B - labeled on the RACK RAILS on front side of RACK

Locate Circuit D - labeled on the RACK RAILS on front side of RACK





GO BEHIND THE RACK AFTER LOCATING B AND D POWER CIRCUTS


WE WILL access THE CONTROLS FOR THESE CIRCUITS on the back


Make sure the switch is set to LOCAL


Then press the "Local Sequence Initiate"

PRESS for a second or so really press the button!


The power should restore on the Amps that are off.  May take about 5-10 seconds

NOTE Amps that are on will stay on