Plug in the DC Power if you want to not use Batteries | |
Turn the Camera On | |
Put the SDHC cards in the slots. One or two cards. | |
You have to close the doors of the card slots or else the camera won't recognize the cards | |
Click the Menu Button Also use the the joystick to navigate the menus | |
Navigate to the "wrench" icon and choose Reset Resetting the menus gets the camera back to a default state so you know everything is reset to a starting point | |
Choose System Setup >Reset >All Settings | |
OK | |
Set the Date and Time | |
Navigate to the Media icon page 1 Set the System Frequency to 59.94 | |
Navigate to the Media icon page 1 Set the System Frequency to 59.94 | |
Same menu page 2 set the Frame Rate to 23.98 | |
Next format the SDHC cards Same Media Menu Page 1 Choose Initialize Media | |
Choose which card to format | |
Choose Complete formatting | |
Click OK to confirm | |
Same media page choose the Main Recording Format as MP4 | |
Same media page choose the Main Recording Format as MP4 | |
Media Menu Page 2 choose Resolution as UHD 3840 x 2160 YCC420 8bit | |
Go to Media Menu Page 3 and Choose to turn on Relay Recording this will enable the recording to span the two SD cards if you have two loaded | |
Navigate over to the Image menu and choose to turn on Canon Log 3 if you want to record in Log Or BT709 if you don't want that log setting | |
Auto Focus On or Off Turn ON if you want to use the Face Detection. That is useful to make sure you keep faces in focus. | |
Auto Focus ON Go to the Camera Menu Page 5 Face Detection Turn it ON | |
Face Auto Focus choose Face Priority | |
Back One page on page 4 on the Camera Menu | |
To change Brightness Click on the ISO/Gain on the side of the camera wait till you see the red scale on the display | |
Then use the Joystick on the LED display and move it up and down to adjust the level | |
You can also use the Joystick on the back of the camera and move it up and down to adjust the brightness level | |
Manage space
Manage content
Integrations