Check that the WHITE Thunderbolt cable is plugged into the IMac | |
Make sure the other end of the WHITE - Thunderbolt cable is plugged into the Blackmagic Design Intensity Pro as shown here. | |
Log into the computer | |
| |
| |
Click on Settings Button | |
Click on Video> | |
Click on Audio Tab > Click on RCA | |
Select Sound
| |
Select Output Tab > Blackmagic Audio | |
If you have video you would like to use in your protools session turn on the TV MAKE SURE THAT THE SOURCE IS SET TO COMPONENT -
| |
PRESS THE SOURCE BUTTON UNDERNEATH THE "9" KEY TO SET INPUTS ON THE MONITOR - Don't change this should be set correctly but just in case it should be set to component input. | |
Select the application that you want to run AVID or Davinci Resolve or Premiere | |
Choose "Premiere Pro CC > Preferences > Playback..." | |
Choose Blackmagic Playback
Click OK | |
Choose "Premiere Pro CC > Preferences > Audio Hardware..." | |
Make sure you Preferences look like this | |
If you get this error click Yes | |
Click OK | |
Don't forget to pan channel 1 LEFT & channel 2 RIGHT and don't use any other tracks | |
USE ONLY TRACK MIXER not CLIP MIXER | |
Some of the Suites on the 1st floor have a Mixer. The mixer settings are shown here.
Channel 1 and 2 are AVID playback are ProTools playback
Also turn up the Master audio on the Board labeled Volume |