| Go into Audio Mode |
|
| Click on Advanced |
|
| Click on Surround Sound |
|
Click on DCP Playout Server for Speaker Inputs |
|
Click on Theatrical Reference 85 db SPL Note there should be 3 yellow bars |
|
...
Projector Setup> Turn on projector fan |
|
The inputs to the projector are here plug in the USB |
|
| or Crew drive |
|
| Log in as commpower on the Barco mac mini shown here |
|
Launch Barco Communicator |
|
Make sure you log in as the Service Technician Click the “User” Icon to log in as Service Technician |
|
Might need to click connect |
|
Log in as UN: st Password: default |
|
Select UT-Projector Double click to load |
|
| Select Lamp button, so it’s blue |
|
| Select Dowser button, so it’s blue |
|
| Go to Chrome, login to browser by going to “192.168.1.226” |
|
| To access Dolby website, username and password is “doremi” |
|
| |
| |
| Go to Control tab > Ingest manager |
|
For Cru Drive : Select a location > Local storage |
|
You can choose to "Hide Ingested Content" Select film Icons make sure both are selected and then click “Ingest” button  |
|
Ingest Scan tab >Ingest tab will light up when the package and film are selected |
|
You will see the ingest monitor copying the File off the USB to the internal server |
|
If you ever want to check the ingest press the "Ingest in progress" button shown here |
|
| Go to Cinelister > Schedule (This is where you can add or edit an existing show) |
|
UN is manager Password is "password" > ok |
|
to find files >Control>Content Manager |
|
Then go to Comp Playlist to see a list of files |
|
To delete a file - select it in the list then click the delete button |
|
You will be asked to confirm Click OK |
|
To make a new show >Cinelister>Editor |
|
Click on New |
|
Or click Open to open an existing playlist |
|
Add any element from the left side by clicking on it |
|
See the list on the right side of the items you want to add in the playlist |
|
| When the playlist is finished click on Save |
|
Title the show and click on save IF you are saving with a show that is already created it'll ask you to confirm you want to overwrite. |
|
To delete a show |
|
Select the show from the list |
|
To play a show >Cinelister>Editor |
|
Load your show or create your show Click OPEN - open your show - OK |
|
Cinelister>Playback |
|
Make sure lock is in manual |
|
Then click on the play button |
|
It will open the last loaded show it will play the last show that was called up in the Cinelister >Editor schedule |
|
| When finished, remember to turn off lamp, wait 1 minute and then turn off fan | If you ever need to request a key for an encrypted DCP, the IMS2000 Serial Number 320028 server certificates are found here: |
| Click the Blue square to turn off projector bulb |
|
| White Square means the bulb is off |
|
...