Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Reverted from v. 2

how to change slider to be for a different source;

...

Pick the Channel you would like to change the input and hold down the A/B button or "OverPress" it till it lights up RED

Image Added

The Input channel of the slider will appear in the Wheatstone Interface software as the selected tab. In our example Input 12.

Image Added

Press the Input Source Knob that is on the audio board in the upper right quadrant.



Turn the knob and while turning look at the LED on the slider channel and will see the sources changing.

Image Added

Look at the LED name of the channel you would like to change and you will see the input change as you twist the knob

Image Added

When you get to the source you would like to select press the top of the

Anchor
_GoBack
_GoBack
Input Source Knob again to assign the input

Image Added

Now if you look at the input you will see the new source

Image Added