Page Comparison

Connect the Lighting Fixture to the lighting grid or find

the fixture on the grid that you want to turn on.

Locate where it is plugged in.

In this picture example the Light is plugged into "S1"

Next we need to find the "Circuit" to turn on that matches "S1"

Go to the chart on the left and find "S"

on the vertical side and the "1" on the horizontal side.

So "S1" is Circuit 73.

On the Strand Lighting Board,

Press F3 to get into the

Setup menu

Press "Right" arrow

until you get to

Menu #9

Press F3 to Select the "Console

default"

Choose Select and then

Press F2 to confirm "Yes"

and reset the defaults

Hit F1 to "ESC

" and get to the home page.


Press F3

for Setup

Select 1.

Patch

Then

press (Select) or F3

Choose 1. "Edit Patch" click on F3 to select

Enter in the circuit to assign to the board.

Followed by the "@" / FX6 button

Then enter in the channel fader # to assign to the board.

EX:
To assign circuit 73 to the board channel fader 40 type in

"73@40" and follow that by pressing the asterisk key ( * )

Asterisk key that is the same as "enter"

to set the dimmer assignment

Make sure Grand Master is also up

on the slider position