CMB STUDIOS - Strand 200 Lighting Board - Workflow

Connect the lighting fixture to the lighting grid or find

the fixture on the grid that you want to turn on.


Locate where the fixture is plugged in by following the cable up to the numbered square.


In this picture example, the light fixture is plugged into circuit "73"

On the Strand Lighting Board,

Press F3 to get into the Setup menu

Press the "Right" arrow to navigate to Menu #9


Press F3 to Select the "9. Console default"


Press F2 to confirm "Yes" and reset the defaults

Press F1 to "ESC" and get back to the home page


Press F3 for Setup

Choose "1. Patch"

Then press F3 to select

Choose "1. Edit Patch"

Then press F3 to select

Enter in the circuit to assign to the board.

Followed by the "@" / FX6 button

Then enter in the channel fader # to assign to the board.

EX:
To assign circuit 73 to the board channel fader 40 type in

"73@40" and follow that by pressing the asterisk ( * )/FX PAGE button

The Asterisk key acts the same as an "enter" key on a keyboard.

Press to confirm your dimmer assignment.

Make sure that the scene mode is in


"Single Scene" seems to work the best


 

 

Preset A should be up

Make sure Grand Master is also up

on the slider position


TROUBLE SHOOTING TIP

Pressing "scene mode" over and over with Preset A and Grand Master up then that will toggle on the lights if they don't come on AT FIRST TRY.

To see the settings of the circuits click the ESC or F1 key till the

"Main Menu" appears then click F3 or Setup to display the patch menu.
Arrow right to select the "2nd"

setting then click Select or F3 to select the Display Patch menu.

The patch settings will appear per dimmer and by selecting the "right" arrow key

can scroll through all the dimmers and see what circuit is

patched to that controllable dimmer.
 


This example shows Circuit 44 and Circuit 80 are both controlled by channel fader #44

on the Strand Dimmer Board