Page Comparison

...

This step is for computer setup and output to a Calibrated MONITOR if you don't have a monitor connected you should move to a station in CMB 4.120 or the Grad Hall CMB 4.112

Choose the Video I/O and GPU Choose Intensity Shuttle Thunderbolt

To Bring into Resolve – Launch Resolve Application
	Click On New Project
Title the project – click Create
Double click the project to load it
Set your Video I/O Go to DaVinci Resolve>Preferences	Image Removed	Image Removed
Or Choose Intensity Extreme depending what suite or lab you are using	Image Removed
Change the Control Panels to the Tangent Devices Wave or AVID Artist Color if one is connected Click Save to apply changes	Image Removed
Unfortunately you have to restart Davinci to load the preferences.	Image Removed
Quit the program and choose to save then reopen using the steps above. Image Removed	Image Removed
Set up Project Settings. Click on the Project Settings Icon in the lower right corner of the screen
*LITE/FREE version of Resolve* Click on Master Project Settings > Set Timeline Format Timeline Resolution for the *LITE/FREE* version of Resolve 3840 x 2160 Ultra HD Video Monitoring Video Format UHD 2160 23.976 Choose Save to apply these preferences
4K Settings!! Project Settings>Master Project Settings Timeline Format Timeline resolution - Choose 4096 x 2160 DCI Video Monitoring - Video Format - Choose 4K 2160p 23.976
2K Settings!! Project Settings>Master Project Settings Timeline Format Timeline resolution - Choose 2048 x 1152 2K 16:9 Video Monitoring - Video Format - Choose 2K 1080p 23.976