| Zoom H4 how to connect via USB to computer menus | ||||||
Click on Menu on the Side Scroll button |
| ||||||
Select USB |
| ||||||
Choose Audio I/F |
| ||||||
Then Choose |
| ||||||
Then plug in your type 1 older USB mini cable to the H4 and your computer |
| ||||||
Open Audio Midi setup |
| ||||||
On the Audio Devices should see the H4 Audio In and Out |
| ||||||
Then go to ProTools Aggregate I/O |
| ||||||
Open ProTools |
| ||||||
Click OK to enable ProTools to record from ANY Hardware |
| ||||||
Click OK on access to use the Microphone |
| ||||||
Open or Create a session |
| ||||||
Create a New Audio Track |
| ||||||
Choose to create a Mono Track |
| ||||||
On the track menu drop down shown here > Click it to show the I/O and check the box to show inputs and outputs on the track |
| ||||||
On the Input interface choose |
| ||||||
|
| ||||||
On the output make sure that is set to Built – In Output 1-2 Stereo |
|
Page Comparison
Manage space
Manage content
Integrations